# StringerCAD.com — 1:1 Printable Stair Stringer, Roof Rafter Birdsmouth & Subwoofer Box DXF CAD Studio

> Deterministic woodworking framing & car-audio Helmholtz enclosure CAD studio. Generates full-scale 1:1 multi-page A4/Letter tiled shop-template PDFs (with calibrated 100.0mm / 4.00" ruler verification squares and A1..B3 alignment crosshairs) plus AutoCAD R12 CNC DXF cut-sheets.

## Pricing & Commercial Terms
- Free Tier ($0 USD): Unlimited interactive CAD calculation, IRC code / Helmholtz SPL checks & Free Summary Proof PDF.
- Single 1:1 Template + DXF Pass ($9.90 USD one-time): 1:1 Full-Scale Multi-Page Tiled Shop Template PDF, AutoCAD R12 DXF (`OUTER_CUT`, `SPEAKER_CUTOUT`, `PORT_WALLS`, `DIMENSIONS`) & Shop Cut-List CSV.
- Pro Framing & Audio Shop ($16.00 USD/month): Unlimited commercial carpentry framing & custom car-audio cabinet exports.
- Partner Portal: 30% recurring commission ($4.80/mo per Pro Shop or $2.97 per Single Pass) at https://stringercad.com/partners.html

## 36 Specialized Carpentry Framing & Subwoofer Enclosure Presets
- [Stair Stringer Calculator & 1:1 Printable Shop Template](https://stringercad.com/templates/stair-stringer-calculator-1-to-1-template.html): Full-scale 1:1 printable multi-page tiled 2x12 stair stringer notch template with IRC 4"-7.75" rise check, >=3.5" throat audit, and Step #1 bottom-drop adjustment.
- [Deck Stair Riser & Step-1 Tread Bottom-Drop Calculator](https://stringercad.com/templates/deck-stair-riser-tread-drop-calculator.html): Eliminates tripping hazards by deducting exact 1.5" 2x decking tread thickness from Riser #1 so every finished step matches within 0.0mm.
- [Roof Rafter Birdsmouth, Seat & Plumb Cut 1:1 Template](https://stringercad.com/templates/roof-rafter-birdsmouth-cut-template.html): Computes 6/12 common rafter line length, ridge plumb angle, HAP height above plate, and IRC R802.4.2 compliant birdsmouth seat/heel notch.
- [Deck & Stair Baluster Spindle Spacing Calculator (<4" Sphere)](https://stringercad.com/templates/baluster-spindle-spacing-calculator.html): Calculates exact equal clear gaps under 3-7/8" to pass the mandatory IRC R312.1.3 4-inch sphere guardrail inspection rule with cumulative tape marks.
- [Ported Subwoofer Box & L-Slot Helmholtz Calculator](https://stringercad.com/templates/ported-subwoofer-box-l-slot-calculator.html): Computes exact Helmholtz slot port physical length with 3-wall end correction, automatic 90-degree L-bend fold, 20Hz-120Hz SPL curve, and 3/4" MDF cut-list.
- [12-Inch Vented Subwoofer Enclosure Cut-List & 1:1 Baffle PDF](https://stringercad.com/templates/12-inch-subwoofer-enclosure-cut-list.html): 2.20 cu.ft @ 33Hz daily ground-pounder 12" subwoofer box blueprint with 8+ precision MDF panels, R12 CNC DXF, and 1:1 printable cutout circle.
- [Dual 10-Inch Ported Sub Box AutoCAD R12 DXF Generator](https://stringercad.com/templates/dual-10-sub-box-dxf-generator.html): 2.50 cu.ft @ 35Hz dual 10" vented trunk enclosure with double front baffle, twin SPEAKER_CUTOUT DXF circles, and zero-turbulence slot port.
- [Segmented Woodturning Bowl Ring & Wedge Miter Calculator](https://stringercad.com/templates/segmented-woodturning-ring-calculator.html): Computes exact 15.00-degree miter saw angle, outer/inner segment edge lengths, strip width, and kerf-compensated board length for 12-segment lathe rings.
- [Crown Molding Compound Miter & Bevel Flat-Cut Calculator](https://stringercad.com/templates/crown-molding-compound-miter-calculator.html): Exact compound miter and blade bevel settings for cutting 38-degree and 45-degree spring-angle crown molding flat on the miter saw table.
- [3-Step Low Patio & Deck Stair Stringer 1:1 Template](https://stringercad.com/templates/3-step-deck-stair-stringer-template.html): 21-inch total rise 3-riser grade-level patio deck stair layout with Step #1 1.5" decking drop and full-scale printable 2x12 saw template.
- [4-Step Front Porch 2x12 Stair Stringer Layout Calculator](https://stringercad.com/templates/4-step-porch-stringer-2x12-layout.html): 28-inch rise front porch stair stringer layout checking 48-inch wide 4-stringer 16" O.C. support and IRC 7.00" comfortable step rise.
- [5-Step Raised Deck Stair Stringer & Bottom-Drop Guide](https://stringercad.com/templates/5-step-deck-stringer-bottom-drop.html): 36-inch residential deck height 5-riser stair calculator with ledger drop hanger geometry and exact framing square brass stair-gauge numbers.
- [7-Step Split-Level & Garage Entry Stair Stringer Calculator](https://stringercad.com/templates/7-step-stair-stringer-code-calculator.html): 50-inch split-level entry stair layout calibrated for 1.0" thick oak/pine treads and 36-inch minimum IRC egress width.
- [12-Step Basement 8ft Ceiling Stair Stringer Calculator](https://stringercad.com/templates/12-step-basement-stair-stringer-calculator.html): 88-inch basement floor-to-floor 12-riser stringer calculator verifying 10.0" minimum IRC tread depth and 12ft/14ft 2x12 stock length.
- [14-Step 9ft Ceiling Interior Stair Stringer & Oak Tread CAD](https://stringercad.com/templates/14-step-interior-oak-stair-calculator.html): 104-inch main-floor residential staircase using 1-1/16" solid oak bullnose treads and stiff 1-3/4" x 11-7/8" structural LVL stringers.
- [Engineered LVL Stair Stringer 3.5-Inch Throat Code Checker](https://stringercad.com/templates/lvl-engineered-stair-stringer-throat-check.html): Long-span 16-riser commercial/custom deck stair verification using 14-inch deep LVL beams for zero bounce and oversized throat reserve.
- [Metric (mm) Stair Stringer Calculator & A4 1:1 Printable PDF](https://stringercad.com/templates/metric-mm-stair-stringer-printable-template.html): Precision millimeter stair stringer calculator for UK, EU, AU & NZ builders with calibrated 100.0mm x 100.0mm A4 1:1 tiled template sheets.
- [4/12 Pitch Shed & Lean-To Roof Rafter Birdsmouth Calculator](https://stringercad.com/templates/shed-roof-rafter-4-12-pitch-birdsmouth.html): Low-slope 4/12 garden shed and lean-to roof rafter template with exact 18.4-degree plumb cut and 2x4/2x6 top-plate birdsmouth seat.
- [6/12 Gable Garage & Cabin Common Rafter Cut Calculator](https://stringercad.com/templates/gable-roof-rafter-6-12-pitch-calculator.html): 20-foot span detached garage 6/12 gable roof rafter layout deducting 1.5" ridge board thickness with 16" eave soffit overhang.
- [8/12 Steep-Slope Roof Rafter Plumb & Heel Cut 1:1 Template](https://stringercad.com/templates/steep-8-12-roof-rafter-plumb-cut-template.html): 26-foot span 8/12 snow-country roof framing calculator checking 2x10 HAP height above plate and maximum 1/3 depth birdsmouth notch.
- [12/12 Pitch 45-Degree Cabin & Dormer Rafter Calculator](https://stringercad.com/templates/12-12-a-frame-rafter-birdsmouth-calculator.html): 45.0-degree 12/12 A-frame cabin and steep dormer rafter layout with printable 1:1 birdsmouth seat/heel template.
- [Timber Pergola & Patio Cover Rafter Birdsmouth Layout](https://stringercad.com/templates/pergola-rafter-tail-overhang-layout.html): 3/12 patio cover and pergola rafter bearing notch calculator with generous 18-inch decorative tail overhang layout.
- [38-Degree Standard Crown Molding Miter & Bevel Calculator](https://stringercad.com/templates/38-degree-crown-molding-miter-bevel-chart.html): Instant 31.62-degree miter and 33.86-degree bevel flat-cut angles for standard 38-degree US home-center crown molding at 90-degree corners.
- [45-Degree Colonial Crown Molding Flat Compound Cut Tool](https://stringercad.com/templates/45-degree-colonial-crown-molding-calculator.html): Computes 35.26-degree miter and 30.00-degree bevel settings for 45-degree traditional colonial crown molding on 90° and 135° bay corners.
- [6ft & 8ft Deck Rail Baluster Layout (IRC 4" Sphere Pass)](https://stringercad.com/templates/deck-guardrail-4-inch-sphere-baluster-layout.html): Pre-calibrated 90-inch clear rail span for 2x2 wood or 3/4" round aluminum balusters with zero-math layout tape coordinates.
- [Stair Rake Angled Baluster & Banister Spindle Calculator](https://stringercad.com/templates/stair-rake-baluster-spindle-spacing-guide.html): Ensures angled stair guardrail spindles pass the tighter 4-3/8" IRC R312.1.3 triangle/rake sphere rule from bottom newel to top post.
- [16-Segment Woodturning Vessel & Drum Shell Miter Calculator](https://stringercad.com/templates/16-segment-woodturning-bowl-ring-calculator.html): 11.25-degree precision wedge miter calculator for 14-inch diameter 16-segment hardwood lathe bowls and stave snare drum shells.
- [24-Segment Fine Feature Ring Woodturning Cut Calculator](https://stringercad.com/templates/24-segment-open-segmented-turning-ring.html): 7.50-degree ultra-smooth 24-segment feature ring calculator in millimeters with 1:1 printable wedge setup template.
- [8-Inch Under-Seat Crew Cab Truck Ported Sub Box Cut-Sheet](https://stringercad.com/templates/8-inch-underseat-truck-ported-sub-box.html): Compact 0.85 cu.ft @ 36Hz 8-inch vented truck enclosure engineered for tight under-seat clearance with R12 CNC DXF export.
- [Single 10-Inch 1.35 cu.ft @ 34Hz L-Slot Sub Box Blueprint](https://stringercad.com/templates/single-10-inch-ported-subwoofer-l-slot-box.html): Tight, punchy 1.35 cu.ft @ 34Hz single 10-inch L-slot vented subwoofer enclosure with full 8+ panel 3/4" MDF cut-list.
- [Dual 12-Inch 4.0 cu.ft @ 32Hz Labyrinth Sub Box CAD & DXF](https://stringercad.com/templates/dual-12-inch-32hz-labyrinth-subwoofer-box.html): Heavyweight 4.00 cu.ft net @ 32Hz dual 12" folded labyrinth bass enclosure with double 1.5" front baffle and cabin-gain SPL curve.
- [Single 15-Inch 3.5 cu.ft @ 28Hz Low-End Labyrinth Box DXF](https://stringercad.com/templates/single-15-inch-low-tuned-28hz-sub-box-dxf.html): Deep sub-bass 28Hz Helmholtz labyrinth enclosure for high-Xmax 15" subwoofers with 1:1 printable 13.94" baffle cutout template.
- [Dual 15-Inch 7.0 cu.ft @ 30Hz SUV Hairtrick Ported Box CAD](https://stringercad.com/templates/dual-15-inch-hairtrick-30hz-spl-enclosure.html): Competition SUV 7.0 cu.ft @ 30Hz dual 15" enclosure built from 1.0-inch thick MDF/Birch with massive low-velocity slot port.
- [18-Inch 6.2 cu.ft @ 29Hz Home Theater & SPL Labyrinth Box](https://stringercad.com/templates/18-inch-subwoofer-folded-horn-labyrinth-cad.html): Infrasonic 29Hz tuned 18-inch subwoofer enclosure for home cinema LFE and SPL builds with AutoCAD R12 CNC router cut-sheets.
- [High-Excursion 12-Inch 2.5 cu.ft @ 34Hz High-Port-Area Box](https://stringercad.com/templates/sundown-style-12-inch-34hz-slot-port-box.html): Engineered with 15+ sq.in of slot port area per cubic foot to handle 1,500W–3,000W RMS high-Xmax 12" subwoofers with zero port chuffing.
- [15-Inch Live Sound PA Bass-Reflex 42Hz Birch Cabinet CAD](https://stringercad.com/templates/baltic-birch-pa-15-reflex-cabinet-cut-sheet.html): 18mm Baltic Birch live-sound 42Hz punchy PA bass-reflex subwoofer cabinet in metric mm with CNC DXF and A4 1:1 baffle template.
